The below instruction is about how to repair a tire when you have a problem of auto flat tire and need to repair it immediately so that you can drive to a nearby service center for a complete check and repair.
Repair a tire with reamer and plugs
1.Remove any puncturing object, use the rasp tool to roughen and clean inside of the puncture holes.
2.Insert the plug centered in the eye of the needle into the puncture holes until the plug is pushed approximately 2/3 of the way in.
3.Pull needle straight out with a rapid motion.
4.Cut off excess plug material flush with the tire tread.
5.Re-inflate the tire and test for air leaks by applying soapy water to the repair area, make sure no bubbles appear.
Repair a tire with sealant
This is the most recommended way to repair or prevent automobile flat tire. Actually much better than using plugs as above.
1.Unscrew and remove the tire valve core.
2.Attach the sealant filler tube to the bottle tip and tire valve stem, squeeze in the recommended amount of tire sealant.
3.Replace the tire valve core.
4.Inflate the tire with a portable air pump powered by a cigarette lighter.
5.Drive the car/truck slowly for a short distance to distribute sealant to the puncture.
The tools for repairing flat tires
1.Slime 70004 Power Spair 48 Piece Tire Repair Kit
This tool has all the accessories including a tire inflator, a 24 oz. bottle of Slime Tire Sealant, a reamer, a plug set etc. It’s for both plugs and sealant repair.
2.Slime 70005 Safety Spair 7-Minute Flat Tire Repair System 12-Volt
This tool is only for repairing a tire with sealant, but it’s a highly integrated machine and can send the sealant together with air into the tire by pushing a button. It’s really very convenient and highly recommended!